Mycro - Em – CIAW7770 Waterproofing Chemical

MYCRO - EM – CIAW7770 is a two-component acrylic polymer modified elastomeric waterproofing membrane which consists of MYCRO - EM powder and MYCRO - EM liquid acrylic emulsion. It requires only clean fresh water on site mix when mixed in the proper proportions, an easily brush able coating is produced. MYCRO - EM powder consists of specially selected cements, graded hard-wearing aggregates and additives supplied in powder and MYCRO - EM liquid component of blended acrylic copolymers. The polymer provides MYCRO - EM with exceptional adhesion, toughness and durability.

Technical information: Elongation at break % DIN53504 @27°C --- > 500 %

Uses: 

• Water tanks, reservoirs, swimming pools
• Roofs and terrace of all types of low- and high-rise building
• To protects against concrete decay providing a long-lasting barrier to waterborne corrosive salts and atmospheric gases
• To re-face and even out variations in concrete and masonry surfaces
• To seal concrete masonry walls and bridges the shrinkage cracks which are static
• To provide a tough and durable coating which cannot be easily damaged or worn away

Advantages: 

• Minimum surface preparation needed - Low labour costs
• Applied directly to the damp concrete and masonry
• Excellent adhesion - Bonds to porous and nonporous surfaces
• Non-toxic-ideal for potable water tanks
• Waterproof - Excellent for damp-proofing basements
• Breathable-allows transmission of water vapor from interior of building
• Excellent for concrete roof, leaking brick and masonry walls
• Good resistance to Carbon dioxide and Chloride ion diffusion

Application: Before applying MYCRO- EM, prime the surface with MYCROPRIME – CIAW6557. Apply the mix of MYCRO-EM with the help of brush on the prepared surface. It is recommended that for general resurfacing the total thickness of the applied material be 1 to 2 mm. Areas subjected to moderate and heavy loads/ hydrostatic pressure, minimum 2mm thickness coating is recommended with screed above. Allow the MYCRO - EM to dry before covering with screed. Sprinkle coarse sand on wet surface of final coat for better adhesion of screed. Average drying time is 4 to 6 hours at normal temperatures.

Packages: 1L, 5L, 10L and 20 L