Mycroepdm Primer

MYCROEPDM Primer is a single component, solvent based, synthetic rubber primer designed to deliver enhanced adhesion to EPDM rubber substrates.

Features and Benefits 

• Provides Superior Bond to EPDM Surfaces 
• No VOC’s & No Harmful Odors 
• Water Based 
• Flexible When Cured
• Cleans Up with Soap & Water 
• Non-Flammable

Application

MYCROEPDM Primer is applied either by brush, roller, or airless spray application. This primer will require one generous coat with the goal of maximizing adhesion to the existing EPDM roof membrane. The recommended coating thickness of the EDPM Primer is between 4-5 mils DFT. 

Drying Time

Curing time will vary depending on temperature and relative humidity. MYCROEPDM Primer will be dry to the touch and will be ready for coating within 1-2 hours at 25°C (50% RH). The primer will remain very sticky after it dries, apply a topcoat as soon as possible after it has dried to the touch and is uniform in colour, to prevent contamination of the primed surface.

Package: 5,10 & 20